|
Amine
Free Pink Anti-Static
These bags provide anti-static protection with a negligible presence of amines
when compared with traditional pink anti-static. They function in low relative
humidity, so they don't need to draw as much moisture from the air to be effective
against static charges, and they won't corrode polycarbonate surface.
- Has a surface resistivity
of less than 1 x1012 ohms/sq.
- Four and six mil
products meet the full static decay requirements of MIL-PRF-81705D,
Type II and ElA-541.
- Produced under strict
ISO 9002 manufacturing guidelines.
|
|
|
Pink
Anti-Static |
The traditional
protective film for packaging static sensitive and non-static
sensitive components where electrostatic contamination is
a problem.
|
- Has
a surface resistivity of less than 1x1012 ohms/sq.
- Meets
the full static decay requirements of MIL-PRF-81705D,
Type II and EIA-541.
- Produced
under strict ISO 9002 manufacturing guidelines.
|
Black
Conductive |
These
bags and film and produced with a carbon black additive to
provide protection for sensitive electronic devices or to
line containers where explosive materials are stored. Unlike
traditional and non-amine films, black conductive films are
humidity independent, so they require no humidity to remain
effective. They also offer a virtually unlimited shelf life
and execellent corrosion resistance, and will not contaminate
products with which they come in contact.
|
- Has
a surface resistivity of less than 1000 ohms/sq and a
volume resistivity of less than 300 ohm/cm.
- Meet
the full static decay requirements of MIL-PRF-81705D,
Type II and EIA-541.
- Produced
under strict ISO 9002 manufacturing guidelines.
|
Transparent
Metallic Static Shielding Bags |
Total
Faraday Cage protection and visibility for highly sensitive
electronic components. Guard against static charge from both
inside and outside with three layers of anti-static protection.
50% transportation for easy product identification. This
bag is buried metal construction; a conductive aluminum shield
layer is buried between 2 static dissipative polymeric plastic
layers.
|
- Contains
no amines, amides of N-Octanoic acid.
- Polycarbonate
safe.
- Static
shielding notice is stamped in yellow on each bag.
- Meets
the electrical and physical requirements of MIL-PRF-81705D
Type III.
- Also
offered in reusable Zip Top style.
|
Please contact CPC with inquiries
and orders on these products as well as any other packaging
needs you may have. Remember, CPC is the One Source For All
Your Packaging Needs. |
|
|